Brake Run Turn Signal Conversion

Brake Run Turn Signal Conversion or short BRT will turn your Rear Stock turn Signals in to additional Running and Brake Lights.
This conversion allows for more visibility to vehicles behind you.
Our BRT kit does not require you to change your lenses and will work with
 Amber, red, clear or smoked lenses.
There are 2 BRT kits available, allowing these kits to be fitted in virtually all Motorcycles.

The BRT-18 Kit uses a strip with 3 5050SMD Led's for each turn signal, totaling an output of 18000MCD and using only 0.02A as running lights and 0.11A as brake lights.

The BRT-36 Kit uses 2 strips with 3 5050SMD Led's for each turn signal, totaling an output of 36000MCD and using only 0.04A as running lights and 0.21A as brake lights.

The first clip shows a BRT-36 installed on a Honda with Stock Amber lenses.
Installation time was under 1 hour.
The control unit is placed behind the tail light under the rear fender.
Look at the light reflections on the Towels to see the actual colors.

The second Clip is a principal demonstration.
First showing the Stock run, brake, turn signals without a BRT,
then showing the same functions with a BRT unit.

Each BRT Kit includes the appropriate LED Strips, the BRT Control Unit, Wire and Hardware for both solder and solder-less installation and Full Installation Instructions are provided also.